Everything you need to install storage cabinets

Steps

1. Once the storage components set-up is planned (directcloset.ca or in store), locate the wood studs behind the drywall
2. Trace a horizontal line on the wall, using a level
3. Mark the position of the studs on the line. Screw in rail sections end-to-end. Cap the ends.
4. Attach brackets at the top of the partitions and suspend on rail.
5. Attach the top, bottom, and middle shelves with locking screws. The other shelves are removable and can be ajusted along the different slots.
6. Install poles and remaining items.

List of materials

• 2″x18″ ‘Horizontal’ Suspended Rail (363024) 89145156
• 2″x24″ ‘Horizontal’ Suspended Rail (363651) 89145157
• 47-9/16″x14-3/4″x75″ Espresso colour Partition (362983) 89145133
• Pack of 2 17-3/4″x14-5/8″ Espresso colour Shelfs (363011) 89145138
• Pack of 2 24-3/4″x14-5/8″ Espresso colour Shelfs (363014) 89145141
• Pack of 2 14-7/8″x14-5/8″ Espresso colour Corner Shelfs (363646) 89145147
• 17-1/2″ Hanging Rod (363026) 89145159
• 23-1/2″ Hanging Rod (363027) 89145160
• 29-1/2″ Hanging Rod (363028) 89145161
• 30″ Cube (363031) 89145164
• Pack of 2 Espresso colour Drawers (363022) 89145153
• Pack of 2 Espresso colour Doors (363020) 89145150

Tools

• Laser Studs Detector (329806) 0305326
• 8″ Slip Joint Pliers (358651) 00335854
• 1″x16′/5 m ‘MaxSteelTM’ Tape Measure (242737) 0305010
• 24″ Box Beam Level (338737) 07045030
• 13V 3/8″ VSR Cordless Drill (357116) 19835399
• 1/2″ Wood Drill Bit (350401) 81205006
• 1/8″ Wood Drill Bit (350395) 81205000